When we use water, what doesn’t stay where we want it to go goes down the drain and to a wastewater treatment plant. This is where they clean the water so it can be used safely again. Have you ever thought, what happens to all the dirt and waste that is removed from the water during this process? This is incredibly important given that this is what protects our water supply. The remaining waste is referred to as sludge, and sludge thickening is one of the 4 main processes in the wastewater treatment process.
Sludge is a wet, thick substance that remains after all dirty water has been cleaned. Wastewater treatment plants produce a lot of sludge, which is treated through a process called thickening. This process causes them to take away some of the water from the sludge. The thicker the sludge, the easier it is to manipulate and manage. There are various ways through which the sludge can be thickened. Some common kalový lis methods include gravity thickeners, centrifuges and a process called dissolved air flotation. All of these approaches serve the same function: to separate the solid and liquid components of the sludge, concentrating the solids for easier handling.
There is two important reasons why BOEEP sludge thickening is very crucial. First of all, it works as sludge-reducer. A smaller volume of sludge means less sludge to transport and dispose. Not only will this cut costs, but by using recycled materials, this will also reduce the impact on the environment. Less sludge translates into less waste polluting our world. Second, if the solids in the sludge are concentrated, the treatment plant can produce a higher quality of water. The treated water is safe to return to nature or to be used for other purposes, thus kalový lis becoming a valuable asset.
BOEEP Wastewater treatment plants in modernity utilize various technologies, which work together to seamlessly treat the sludge generated. Many plants, for example, start the thickening process using gravity thickeners. These thickeners also allow the water to drain naturally, and remove most of the liquid. They might then put it in centrifuges, which spin the sludge really fast to pull out even more water and thicken the solids. Sometimes they also use dissolved air flotation, which pulls the solid bits to the surface so they can be skimmed off. Over the years these methods have been improved and refined, increasing the effectiveness and efficiency of sludge thickening.
New techniques and technologies in relation to further wastewater treatment are developed as advances in technology. Microwave technology is already being used by some companies to dry out sludge. This odvodňovací kalolis means that there will also be less wet sludge to transport and dump — good for the environment, and can definitely save a lot of money. Other companies are also experimenting with creative ways to convert sludge into energy, if not fertilizer. This means rather than simply discarding sludge, treatment plants could monetize it and reduce waste even further, a win-win scenario.
EN
